Blog
News, pilot projects, podcast and know-how.
Podcast 7 October 2026
Galvanic Anode Cathodic Protection: What Actually Works
New Concretely episode: Christian Stone (CPT) on galvanic zinc anodes in cathodic protection, where they work and where their limits are.
Read more →
Podcast 20 July 2026
Building Cities from Cities: Recycled Cement Paste at Holcim
Concretely episode: Alfonso Paradinas Aguilera (Holcim) on recycled cement paste as a clinker substitute as fly ash and slag become scarce.
Read more →
Pilot project July 2026
First concrete pilot: moisture measurement on a bridge in Zurich
In our first concrete pilot project, AntOne sensors measure moisture and temperature in the existing concrete of a bridge in Zurich. They were post-installed.
Read more →
News June 2026
Intect app available for pilot partners
The Intect app for phone and tablet is here: create projects, activate sensors and follow the drying curve right on site.
Read more →
News June 2026
Web portal for pilot projects is online
The Intect web portal is online: analyse measurement data in the browser, manage access and share projects with site managers and planners.
Read more →
Podcast 17 May 2026
Inspecting Bridges with Particles from Space
Concretely episode: Andreas Schneider (G-Scan) on cosmic muons that make prestressing tendons and voids inside concrete visible.
Read more →
Podcast 2 May 2026
Concrete Inspection: GPR, Ultrasound & AI
Concretely episode: Dr. Koichi Oba (Proceq) on ground-penetrating radar, ultrasound and AI in the non-destructive testing of ageing concrete structures.
Read more →
Pilot project March 2026
First screed pilot: monitoring screed drying at the school in Ludesch
In our first screed pilot project, AntOne sensors monitor screed drying at the school in Ludesch. They were installed directly in the fresh screed.
Read more →
News March 2026
AntOne enters the pilot phase
Our first sensor measures moisture and temperature directly inside mineral building materials. It is used exclusively in supervised pilot projects.
Read more →Know-how
Practical knowledge on screed drying, covering readiness and moisture measurement — factual, with reference to standards.
Know-how 14 July 2026
Covering readiness and the CM test: limits, procedure, right timing
Covering readiness per DIN 18560 / SIA: CM limits for CT and CAF, the CM test procedure, and why monitoring schedules the test instead of replacing it.
Read more →
Know-how 14 July 2026
Measuring moisture in existing concrete: methods compared
Measuring moisture in existing concrete: CM test, kiln-drying method and continuous sensors compared. Use before refurbishment, waterproofing and covering.
Read more →
Know-how 14 July 2026
Screed drying time: what determines it and how it progresses
What determines screed drying time: screed type, thickness, room climate. Typical curves for CAF and CT, with reference to DIN 18560 / EN 13813.
Read more →
Know-how 14 July 2026
Drying heating: function heating, covering-readiness heating and their monitoring
Function heating vs. covering-readiness heating: procedure, protocol, and why the heating phase's effect should be measured, not just logged.
Read more →
Know-how 14 July 2026
Detecting remoistening: causes, risks, early warning
Remoistening in screed: typical causes, risks for flooring and structure, and how continuous in-material measurement detects the rise early.
Read more →